Front bunk assembly – ShoreLand'r SL82TAL User Manual
Page 11
Midwest Industries, Inc.
Ida Grove, IA 51445
800.859.3028
www.shorelandr.com
0003356
REV G 4/28/06
Page 11
Mount the front bunk support weldments to the pivot weldments by placing them in the channel of the pivot weldments and
attaching with 1/2” x 4-1/2” stainless steel hex bolts and 1/2” stainless steel lock nuts. Place the bunk assembly over the
support weldment, align the holes of the bunk brackets with the holes in the support weldment and secure using 1/2” x 1-1/2”
stainless steel hex bolts and 1/2” stainless steel lock nuts. Tighten but do not over tighten because the bunks must rotate to
conform to the boat bottom.
Note: The bunk pivot base weldment is adjustable on the front cross. Loosen the 1/2” U-bolts (Item #3, Page 14) enough to
move the bunk pivot base weldment in or out on the front cross to a location that best conforms to your watercraft.
Front Bunk Assembly:
Front Bunk Assembly