ShoreLand'r SL150TAL - Manual (Page 2)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com
0002876
Page 2 REV C 11/02/05
Final Assembly Instructions
Remove the small parts from the frame by cutting the
bands. Remove the bolt bag and sort all nuts and bolts
by size.
Refer to the following individual pages for assembly in-
struction by bundles.
Reference: Standing at the rear of the trailer will de-
termine the right and left side of the trailer in the as-
sembly instructions.
The SL150T side frames and crossmembers are as-
sembled at the manufacturer. The spring brackets and
fenders are also assembled at the manufacturer.
Cautions and Warnings:
The law requires that the white ground wire on
both the tongue wire harness and vehicle harness
be properly grounded to the respective trailer and
vehicle frames.
Check all nuts and bolts; tighten before towing.
Tongue Weight Adjustment:
Tongue weight should be 5% to 7% of the total gross
weight of the boat and trailer combined.
Approximate Tongue Weight for Best Towing
Tongue weight too high, move the axle assembly for-
ward. Tongue weight too low, move the axle assembly
backward.
Tire Size & Carrying Capacity Chart
Tire Size LT235/85R-16
Range E
Carrying Capacity 3042 lb. per/tire
Refer to tire side wall for proper tire pressure.
Table of Contents: Page
Final Assembly Instructions .............................. 2
Reference ......................................................... 2
Cautions & Warnings ........................................ 2
Tongue Weight Adjustment ............................... 2
Tire Size & Carrying Capacity Chart ................. 2
Frame Drawing & Bill of Materials .................... 3
Tongue Assembly Instructions .......................... 4
Wiring (Front Tongue / Rear Tongue) ............... 4
Coupler / Safety Chain Assy Instruction. .......... 4
Winch Assembly Instruction ............................. 4
Jack Assembly Instruction ................................ 4
Tongue Drawing / BOM .................................... 5
Winch Drawing/BOM. ....................................... 6
Winch Strap Decal ............................................ 7
Safety Instructions Decal .................................. 7
Jack .................................................................. 8
Rocker Bushings Assembly Instructions .......... 9
Spring Bracket Bushing Assy Instructions ........ 9
Axle Installation (Front / Rear) .......................... 9
Brakes .............................................................. 9
Tire & Rim Assemblies ..................................... 9
Front Bunk Assembly Assy Instructions ........... 9
Rear Bunk Assembly Assy Instructions ............ 9
Wiring (Rear of Trailer) Instructions ............... 9
Taillight Assembly Instructions ....................... 9
Axle Drawing / BOM ......................................... 10
Chassis Drawing & Bill of Materials .................. 11
Bunk Drawing / BOM ........................................ 12
Roller Assembly Drawing / BOM ...................... 13
Wiring Diagram ................................................. 14
Roller Assembly Instructions ............................ 15
Wiring (Rear of Trailer) Instructions ............... 15
Taillight Assembly Instructions ....................... 15
Trailer Adjustments ........................................... 15-16
Winch Post Adjustments ................................ 15
Winch Post Adjustments ................................ 15
Axle Adjustments ........................................... 15
Rear Support Adjustments ............................. 16
Front Support Adjustments ............................ 16