Shutdown, 1 set u p – HEIDENHAIN IK 5000 Addendum User Manual
Page 89
IK 5000 QUADRA-CHEK
89
2.1 Set
u
p
Shutdown
The Shutdown function applies to CNC enabled systems only. During
system shutdown the probe returns to a position defined in machine
coordinates regardless of probe type. The position may be specified
using X, Y and Z coordinates or by choosing the current probe location.
To specify the probe position at shutdown:
Select Tools>CNC...
Enter the Supervisor password into the Password field
Select the Shutdown tab
Select the Enabled checkbox
Enter the X, Y and Z coordinates or click Use Current Location
Click OK
Shutdown settings window