Epson EMP-7950 - Manual (Page 22)

21 Connecting to a Computer
User’s Guide
Projecting Images from the Computer
The shape and specifications of the computer's monitor port will determine
what type of cable should be used. Check the following to see which type
of port your computer has.
Use the accessory computer cable to make the connections.
If the Monitor Port is a Mini D-Sub 15-pin Port (Example)
Computer cable
(accessory)
To monitor port
To [Computer] port (blue)
TIP
• Image sources are auto-detected according to the input signals.
Depending on an output signal of a computer, the image may be
projected in unnatural colours. In such case, set the "Computer
Input" in the configuration menu to "RGB".
p.86
• When connecting more than one device to the projector, use the
[Comp] button on the remote control, or the [Computer/DVI] button
on the projector's control panel to switch between devices after
starting projection.
p.37