Epson EMP-7950 - Manual (Page 150)

149 Saving a User's Logo
User’s Guide
The image to be recorded and a selection marquee
box will be displayed, so move the marquee box to
select the part of the image to use.
Tilt the [ ] button on the remote control or press the [ ],
[ ], [ ] and [ ] buttons on the projector's control panel to
select the part of the image to use as the user's logo, and then
press the [Enter] button on the remote control or the [Auto/
Enter] button on the projector's control panel.
Select "Yes" at the confirmation screen, and then
press the [Enter] button on the remote control or the
[Auto/Enter] button on the projector's control panel.
Select the zoom rate in the Zoom rate setting screen,
and then press the [Enter] button on the remote
control or the [Auto/Enter] button on the projector's
control panel.
4
[ESC]: Return [ ]: Set [ ]: Move [Menu]: Exit
TIP
User's logos can be saved at up to 480 ЧЧЧЧ 360 dots in size.
5
Select this image?
YES NO
User's Logo
6
Set the zoom rate.
Zoom rate:
100% 200% 300%
User's Logo