Epson EMP-7950 - Manual (Page 145)

144 Maintenance
User’s Guide
Take out the old lamp.
Fold out the handle as shown in the illustration below and pull
the lamp out of the projector.
If the lamp is broken, replace it with a new lamp, or contact
your local dealer for further advice. If replacing the lamp
yourself, be careful to avoid pieces of broken glass.
Install the new lamp.
Hold the lamp so that it faces the correct way to fit into the
projector, and then insert the lamp until it clicks into place and
tighten the two lamp fixing screws.
Install the lamp cover.
Slide the cover in until it clicks into place.
4
1 1
2
5
6