Epson EMP-7950 - Manual (Page 144)

143 Maintenance
User’s Guide
Wait until the lamp has cooled down, and then
remove the lamp cover from the base of the projector.
It takes a further one hour after the cool-down period has
finished for the lamp to be cool enough.
Insert the screwdriver that is supplied with the spare lamp or
some other flat-tipped screwdriver into the hollow between the
projector and the lamp cover, and turn it. The lock will be
released. Slide the screwdriver in until the
mark on the lamp
cover and the mark on the projector are aligned. Then lift up
the lamp cover to remove it.
Loosen the two lamp fixing screws.
Use the screwdriver that is supplied with the spare lamp or
some other flat-tipped screwdriver to loosen the two lamp
fixing screws that are securing the lamp to the projector.
2
1
2
3