Polaris 2016 Ranger 570 Full-Size - Manual (Page 56)

54
EMISSION CONTROL SYSTEMS
Noise Emission Control System
Do not modify the engine, intake or exhaust components, as doing so may affect compliance
with U.S.A. EPA noise control requirements (40 CFR 205) and local noise level
requirements.
Operation on Public Lands in the U.S.A.
Your POLARIS vehicle has a spark arrester that was tested and qualified to be in accordance
with the USFS standard 5100-1c. Federal law requires that this spark arrester be installed and
functional when the vehicle is operated on public lands.
Operation of off-road vehicles on public lands in the U.S.A. is regulated by 43 CFR 420.
Violations are subject to monetary penalties. Federal regulations can be viewed online at
www.gpoaccess.gov/ecfr/.
Crankcase Emission Control System
This engine is equipped with a closed crankcase system. Blow-by gases are forced back to
the combustion chamber by the intake system. All exhaust gases exit through the exhaust
system.
Exhaust Emission Control System
Exhaust emissions are controlled by engine design.
An electronic fuel injection (EFI) system controls
fuel delivery. The engine and EFI components are
set at the factory for optimal performance and are
not adjustable.
The emissions label is located under
the hood.
Electromagnetic Interference
This spark ignition system complies with Canadian ICES-002.
This vehicle complies with the EMC requirements of European directives 97/24/EC and
2004/108/EC.
Non-ionizing Radiation: This vehicle emits some electromagnetic energy. People with active
or non-active implantable medical devices (such as heart monitoring or controlling devices)
should review the limitations of their device and the applicable electromagnetic standards
and directives that apply to this vehicle.
Emissions Label (under hood)