Extron Electronics CVC 300 - Manual (Page 7)

Specifications
CVC 300 • Specifications 6
Video input
Number/signal type ..................... 1 component video [HDTV
(Y, P
R
, P
B
), SMPTE (Y, R-Y, B-Y), or
Betacam ® (Y, R-Y, B-Y)] or RGsB
Connectors ..................................... 3 BNC female
Nominal level ................................ 1 Vp-p for Y of component video and
for G of RGsB
0.7 Vp-p for P
B
, P
R
, R-Y and B-Y of
component video, and for R and B of RGsB
Minimum/maximum levels ........ 0 V to 1.5 Vp-p with no offset
Impedance ...................................... 75 ohms
Horizontal frequency .................... 15 kHz to 100 kHz according to selected
mode
Vertical frequency .......................... 50 Hz to 120 Hz
Resolution range ........................... 640x480 to 1920x1200, 480i/p, 576i/p,
720p, 1080i/p
Return loss ...................................... <-35 dB @ 10 MHz
Video output
Number/signal type ..................... 1 RGBHV, RGBS
Connectors ..................................... 5 BNC female
Nominal level ................................ 0.7 Vp-p for RGB
Minimum/maximum levels ........ RGB: 0.0 V to 0.7 Vp-p
Impedance ...................................... 75 ohms
Return loss ...................................... <-45 dB @ 10 MHz
Vertical frequencies ....................... Locked to the detected input rate
Sync
Input type ....................................... RGsB; YUV; Y, R-Y, B-Y
Output type .................................... RGBHV, RGBS
Standards ........................................ SMPTE 170M (NTSC), SMPTE 274M
(1080i/p), SMPTE 293M (480p), SMPTE
296M (720p)
Input level ...................................... 0.3 V to 1.0 Vp-p (sync + video)
Output level ................................... 0.0 V to 5.0 Vp-p
Input impedance ........................... 75 ohms (on Y or Gs connector)
Output impedance ........................ 75 ohms (on H/HV and V connectors)
Specifications