Grass Valley RSAT2 - Manual (Page 21)

Remote Control Panel RSAT2 4. Operation
16 Operating Instructions - Rev. 1 / 11.2001
4.4 LOADING AND SAVING SETUPS
Laden und Speichern erfolgt in Setup–Menü
Speichern: RSAT Save User
Löschen: RSAT Kill User
Ausführen: RSAT Macro User
Currently there is no menu on the SidePanel, so you have to enter some com-
mands from the VxWorks shell.
This implies that you have a terminal connected to the control panel.
Setups are stored in /flash/satpanel (default setups) and in /appdisk/satpanel
(user interactively defined setups).
4.4.1 Loading Setup
SatPanelLoadLearned
Example: SatPanelLoadLearned “/flash/satpanel/mstrmemo.sat”
or SatPanelLoadLearned “/appdisk/satpanel/mysatpan.sat
You have to be careful because you save only the new macro in the flash or
ramdisk, but you do not change the item in the APPLI-CP.INI file.
If you like to have the macro as the default macro you have to change the file
APPLI-CP.INI.
4.4.2 Saving Setup
SatPanelSaveLearned , ,
Example: SatPanelSaveLearned “mysatpan”, “my header”, “hello world”
is the base of the filename.
The (internal) resulting filename will be
/appdisk/satpanel/filename.sat
So any extensions to the filename (e.g. “.txt”) and any preceding
path are ignored.
is a text which appears in the file (as a comment, will later be used
by the SidePanel GUI for the setup choice list).
is the text which has to be written into the big 16-character
display.
The last 2 parameters can be omitted, in that case the header name is an empty
string and the 16-character display is cleared.
4.4.3 Format of the setup files