Grass Valley RSAT2 - Manual (Page 15)

PE
Remote Control Panel RSAT2 3. Installation and Startup
10 Operating Instructions - Rev. 1 / 11.2001
3.4 CONNECTING TO THE DD35 CONTROL PANEL
Attention:
The EMC regulations require the use of properly shielded cables in the instal-
lation of the device or the system. Suitable cables can be ordered from
Philips Broadcast.
MODEM J5B
WIPE SELECTION AUX SELECTION
J6 J7
J5A GPI/GPO PORT 1
PORT 4
J2A
J2B PORT 2
PORT 3
REMOTE
REMOTE 50
PORT 1
PORT 2
J3A
J3B
J4A
J4B
J1
RS 422 CONTROL PANEL RS 232 INTERFACE
Re
Ω
J2A
Part of the DD35
control panel rear
RS-422 Cable
(Option)
RS-422
Ports
AC IN Fuses
Befor mounting the Satellite
Panel, switch to ON
Protective Earth
Fig. 8: Power and control connectors
The panel have a PE terminal as protective earth on rear.