Grass Valley XtenDD v.4.0.x User Manual
Page 37
Supplement Software Release V4.0.x
XtenDD / Production Switchers
33
Operating Instructions -- Rev. 2 / 1.2003
The button Reset Stats can be used to reset all statistics to 0.
The buttons Remove Selected and Remove All can be used to remove unwanted
devices from the list. To get them back, you will have to do another scan. To select
single devices for removal, click them in the device list. To select multiple devices
at once, you can hold down the CTRL key on the keyboard while clicking on the
devices.
You can also ping only selected devices in the list by selecting them and switching
to Ping selected hosts.
The pinging frequency can be adjusted by changing the Ping Delay value. The de-
fault is 1000 milliseconds, i.e. each device is pinged once a second.
The Packet Size of the ping packets can be varied in a range between 32 and 1024
bytes. Default is 32 bytes.
The text area in the lower part of the window is used to print messages when a scan
is done and whenever a answer is received. This information is usually not impor-
tant.
Use the Close button to exit the program