beautypg.com

Electrolux ELECTRONIC BASIC IH 18 User Manual

Page 3

background image

3

When the appliance is operated with a

thermostatic mixer tap, the temperature

setting on the instantaneous water

heater must be around 8°C higher than

on the thermostatic mixer tap.

Recommendation for energy-saving operation:

40°C for washbasin, shower, and bath (knob tangibly engages).

55°C for kitchen sink. If this temperature

is no longer needed, the appliance

should be reset to the 40°C energy-

saving level.

Important instructions for the user

General

- Installation and startup should only ever be performed by an approved

installer or authorised installation firm.

- Before using the appliance, please read through these instructions

carefully. The manufacturer cannot accept any liability for damage

resulting from failure to follow these instructions.

- Fittings and connecting pipes may get hot. Therefore keep children well

away.

Operating the appliance

The ELECTROLUX IH electronic instantaneous water heater heats the water

as the latter continuously flows through it. When the hot water tap is opened,

the appliance switches on at a flowrate of around 3 l/min. When the hot water

valve is closed or if the flowrate is reduced below 2.5 l/min, the appliance

switches itself off again. The appliance is suitable for household use and should

only ever be used for heating of drinking water.

One or more tapping points can be supplied with hot water.

Temperature preselection

The electronic system allows continuous temperature selection in the range

from 30°C to 60°C.

Wash basin

Shower

Bath basin

Kitchen sink

This manual is related to the following products: