Emerson Radio CKD5808 - Manual (Page 33)

3 2
4.) Remove the original battery from the holder and insert the new battery into the
holder the same way, observing the positive (+) direction.
Slide the holder with the new battery back into the slot in the cabinet.
5.) Replace the screw that secures the battery holder in the cabinet.
6.) Turn the radio right side up and confirm that the “ ” indicator is no
longer ‘flashing’ or ‘Off’ if you also have installed a 9V battery.
7.) Save these instructions. You’ll have to do this again five to eight years from
now!
CKD5808_031406.p65 14/3/2006, 11:32 32