Emerson Radio CKD5808 User Manual

Page 20

1 9

5.) The display briefly shows “Cd” and then two dashes “– –” will appear as the

player reads the disc.

After a few seconds the display will show the total number of tracks on the

disc, then playback begins on Track 1.

After 5 seconds of playback the display

will return to the correct time but the

small “CD” and “PLAY” indicators

remain in the display to indicate that a

CD is playing.

Note: If your disc is dirty, heavily scratched, or otherwise unreadable the

display will continue to show two dashes “– –” but playback will not begin.

6.) Adjust the VOLUME control to the desired level.

7.) Playback will continue until the last track has played,

then the player stops, the display briefly shows the

total number of tracks, then returns to the correct

time again. To stop playback before the disc ends

press the

STOP button at any time.

8.) Press on the CD door in the area marked OPEN/CLOSE to open the CD door,

remove your disc, and close the door again.

9.) Press the POWER ON/OFF button to shut the system ‘Off’. The PWR and CD

indicators go ‘Off’.

CKD5808_031406.p65

14/3/2006, 11:32