Grass Valley Triton Plus Revision 3 - Manual (Page 13)

Triton Plus - Control Panels - User Manual 13
Configuration
Joystick Priority
Note This information is applicable only on GPI versions.
Switch SW 6 on the configuration switch set the Joystick priority of the GPI
panel, either to release before switch or to switch before release.
Release Before Switch
This is used in both GPI and Joystick mode. The activation of a new input
line will have no effect until the previous line is released. If more lines are
activated in sequence, the latest activated one will result in a switching as
soon as the previously active is released.
Switch Before Release
This is used in both GPI and Joystick mode. The activation of a new input
line will generate a switching, regardless of how many other lines that are
already set.
The priority can be switched with switch SW 6 according to the pattern
given in Table 7 . The default setting is Switch Before Release (Off)..
Power Alarm
The power alarm can be switched with switch SW 7 according to the pattern
given in Table 8 . The default setting is power alarm disabled (Off).
Table 7. Joystick Priority Mode Switching
SW 6 Joystick Priority
Off Switch before release
On Release before switch
Table 8. Power Alarm Mode Switching
SW 7 Power Alarm
Off Disables Power Alarm
On Enables Power Alarm