Grass Valley PLSDST3 - Manual (Page 3)

DST 312/412 Software Interface Kit Installation iii
General Safety Summary
WARNING: The instructions in this manual are for use by
qualified service personnel only. To avoid personal injury,
do not perform any servicing unless you are qualified to do
so. Refer to all safety summaries before performing service.
Review the following safety precautions to avoid injury and
prevent damage to this product or any products connected to
it.
While using this product, you may need to access other parts
of the system. Read the General Safety summary in other
system manuals for warnings and cautions related to operating
the system.
Injury Precautions
Use Proper Power
Cord
To avoid fire hazard, use only the power cord specified for this
product.
Ground the Product This product is grounded through the grounding conductor of
the power cord. To avoid electric shock, the grounding
conductor must be connected to earth ground. Before making
connections to the input or output terminals of the product,
ensure that the product is properly grounded.
Do Not Operate
Without Covers
To avoid electric shock or fire hazard, do not operate this
product with covers or panels removed.
Use Proper Fuse To avoid fire hazard, use only the fuse type and rating
specified for this product.
Do Not operate in
Wet/Damp
Conditions
To avoid electric shock, do not operate this product in wet or
damp conditions.
Do Not Operate in an
Explosive
Atmosphere
To avoid injury or fire hazard, do not operate this product in
an explosive atmosphere.
!