Grass Valley PLSDST3 - Manual (Page 17)

Connecting the DST 312
DST 312/412 Interface Kit Installation 11
Connecting the DST 312
1. Turn off power on all equipment to which you are making connections.
2. On the Profile video file server, connect a SCSI cable to SCSI B on the rear
panel. Refer to Figure 7.
3. Install the terminator and connect the SCSI data cable on the DST 312 as
shown in Figure 7. You can connect to either Port A or Port B. Make sure
that the toggle switch for the port you are using is set to the “ON LINE”
position, and that the toggle switch for the unused port is set to the “OFF
LINE” position.
Figure 7. Connecting the DST 312 to the Profile video file server
0197-3
PORT A PORT B SERIAL COM
DST312
Profile Video File Server
SCSI B
SCSI-2 Terminator
SCSI-2 Cable
ON LINE
OFF LINE