Grass Valley CR6400 Family v.1.2 - Manual (Page 98)

88
Technical Details
Defaults
Defaults
Default Router State
The factory-default state is to be in stand-alone mode.
The default routing state of a compact router is for input 1 to connect to output 1, input 2 to
connect to output 2, and so on for all inputs and outputs. This is called a diagonal routing. (After
you have made routing changes, the power-up state of the inputs and outputs is the state you
last created.)
 If the router’s rotary switch is at position 0, the router will reset to its factory-default state at
power-up.
Initial Control Panel State
The initial control panel state at power up is “Panel Lock” with all levels selected. Before
performing an operation on any control panel (remote or local) you must turn off its panel lock.
 Remember that a Panel Lock button locks that panel. It does
not lock a router, other control
panels, or a network.