Grass Valley NV9603A v.1.1 - Manual (Page 30)

20
Configuration
Button Definitions
Destination
Lock The button sets or removes a “lock” on the current destination device. The lock
can be removed only by the user (at this panel or at another) that originally set
the lock, or by a panel that has “Force Release” enabled.
The button definition has no fields to configure.
The NV9603A provides no explicit indication, during operation, whether a
destination is locked or unlocked.
This button is available, but does not operate, in multi-destination mode. It is
present on the configuration page as a future feature.
Destination
Protect The button sets or removes a “protect” on the current destination device. The
protect can be removed only by the user that originally set the protect, or by a
panel that has “Force Release” enabled.
Note: a protect prevents others from routing to a destination; a lock prevents
anyone
— even the user who issued the lock — from routing to the destination.
The button definition has no fields to configure.
The NV9603A provides no explicit indication, during operation, whether a
destination is locked or unlocked.
This button is available, but does not operate, in multi-destination mode. It is
present on the configuration page as a future feature.
Destination
Mode The button places the panel in destination mode, in which category selection
buttons select destination categories. If the panel is not in destination mode, it
is in source mode.
Destination
Shift The button toggles between the first and second sets of destinations.
The button definition has no fields to configure.
The button affects the operation of any destination button. Destination
buttons represent two destinations. One belongs to one destination set and
the other belongs to the other destination set.
Free Source The button selects a pre-defined phantom device that can be used to release or
“free” devices on the data (machine control) level. A free source is also used
with tielines to free the tieline for others to use. The free source is defined in the
Level Set Details page of NV9000-SE Utilities.
The button definition has no fields to configure.
The free source button must be used in conjunction with machine control
router(s). Otherwise, it fails with an ‘Inv Src’ message briefly appearing in the
‘Status’ field of the display.
This button is available, but does not operate, in multi-destination mode. It is
present on the configuration page as a future feature.
Type Description