Grass Valley Kayenne XL Package Installation v.7.0.2 - Manual (Page 127)

Kayenne XL Package — Installation and Service Manual 127
Control Panel Unit (PCU) Bios Settings
Control Panel Unit (PCU) Bios Settings
Figure 115. Panel Control Unit
Panel Processor
• Connect a computer keyboard to the PS2 connector on the Panel Pro-
cessor and a computer monitor VGA plug to the VGA socket.
• Press and hold Del key immediately while booting the switcher to
display the BIOS Menu.
• Load the CMOS Default in the Exit menu.
• Select the Main menu and check / set the System Time and Date.
• Select the Advanced menu select Graphics Configuration
• Set Local Flat Panel Type to Customized EDID 1
• Select the Advanced menu select Chipset Configuration
• Set POST Code Output to LPC
• Select the Advanced menu select I/O Interface Configuration
• Set Onboard Audio Controller to Disabled
• Select SIO Winbond W83627 Configuration
• Set Serial Port 1 Configuration to 2F8/IRQ04
• Set Serial Port 2 Configuration to 2F8/IRQ03