Grass Valley KSP Switcher Soft Panel Graphica v.1.0 - Manual (Page 19)

KSP Graphical User Interface — Instruction Manual 19
Operations
Note Pressing any Keyer, Background, or Feature button changes the row delega-
tion button label for that row.
Aux Bus Row Delegation
Delegating a row for Aux has special characteristics; the source select
buttons change display from “Aux” delegation to “source” delegation.
When a row selection button and then the
AUX button is pressed, the dele-
gated bus row source buttons display the available “Aux delegates”.
However once the row is delegated to Aux and a source select button is
pressed, the source select buttons change to display the available Aux
“sources”. Now Aux sources can be selected for the delegated bus row.
Keyer Auto/Cut Transition
Keyer Auto and Cut transitions can be performed from the Keyer Transi-
tion Area of the KSP GUI (
Figure 11 ).
Note Touchscreen response time is deterministic and may not be immediate,
therefore cut transitions from a keyboard may be preferred (see
1-ME USB
Keyboard on page 22 ).
Figure 11. Keyer Transition (Cut) Area
Transitions
Source Selection
Selecting sources for transition from the KSP GUI is performed in the
Source Select area (
Figure 12 ). Rows 1-3 can be delegated as Keyer, Back-
ground, Macro, E-MEM, or Aux using the Delegates pane (see Delegation on
page 17 ).
The source select button center labels change to match the current row del-
egation. The upper left button legends are static keyboard characters as a
guide when using a standard keyboard (not the GV 1-ME USB Keyboard)
(
Figure 12 ).