Grass Valley KSP Switcher Soft Panel Graphica v.1.0 - Manual (Page 18)

18 KSP Graphical User Interface — Instruction Manual
Operations
ME Delegation
Press the desired ME button in the ME Delegation area of the Delegates
pane (
Figure 9 ) to delegate an ME. If source rules have been created, you
can toggle on/off Rules Hold by pressing the Rules Hold button ( Figure 9 ). If
an ME is split (in the GV switcher menu), you can delegate the Primary or
Secondary partition by pressing the
Pri or Sec buttons ( Figure 9 ). Refer to
the Video Production Center User Manual for your Video Frame model for
information about Rules and Split MEs.
PGM PST (Program Preset) is the default delegation upon KSP start up.
Note Upon restart, the KSP delegates to PGM PST (Program Preset) therefore if
you restart the KSP menu, and you want a different ME, you will have to press
the button for that ME in the Delegates menu tab.
Row Delegation
The default row delegation upon start up is:
• Row 1 —Keyer 1,
• Row 2 —Bkgd A, and
• Row 3 —Bkgd B
You can use the default or delegate the rows to Keyers, Background, Macro,
E-MEM, or Aux bus by selecting a Row delegation button, then a Key, Back-
ground, or Feature button, as demonstrated in
Figure 10 with Row 1 dele-
gated to Macro.
Figure 10. ME Transition Area
Background (Bus
Row) Delegation
Pane
Feature (Bus
Row) Delegation
Pane
Row Delegation
Buttons
Keyer (Bus Row)
Delegation Pane