Grass Valley Kaleido-X (7RU) Quick v.7.80 - Manual (Page 21)

9
Kaleido-X (7RU)
Quick Start Guide
To power up the Kaleido-X:
• Plug both power cords from the Kaleido-X into a grounded power outlet.
The startup sequence takes approximately four minutes, during which time some video
may appear on the displays. The startup is completed when the CPU LEDs of the output
cards (second LED from the top) are solid green.
Verifying that the Cards are Ready
To verify that the cards (modules) are ready:
• Check the status LEDs on each card installed in the Kaleido-X frame. Make sure that
none are indicating an error condition (see table below).
Photograph of a Kaleido-X (7RU) frame showing LED indicators on modules.
Note: The Kaleido-X (7RU) does not have power switches, and will start up
as soon as it is plugged in.
CPU LED Color Card Status Action Required
Solid green Ready None
Red Fault Verify that the card is securely seated in the proper
slot in the frame. If status remains unchanged,
remove the card, reseat it and then reboot.
Flashing green Rebooting Wait for card to reboot before starting operations.