Grass Valley Kaleido-X (7RU) Quick v.7.80 - Manual (Page 20)

8
Setting Up Your Kaleido-X (7RU) Multiviewer
Physical Setup
Changing the Output Resolution
To set a display’s output resolution from the monitor wall:
1 Connect a mouse to an output card’s USB connector.
2 Right-click anywhere on the monitor wall, point to Monitor wall (if you clicked a
monitor), and then click Display resolution:
The Display Resolution window appears:
• If you would like the system to automatically select a resolution based on
information from the connected display, select Use detected monitor resolution.
• If you would like to manually set (and fix) the resolution, select the desired
resolution from the Default DVI resolution list:
3 Click OK.
The output resolution is adjusted accordingly.
Powering Up the Kaleido-X (7RU)
IMPORTANT
If you have a KXA-FR7-B frame, make sure a ground cable (not included) is
connected between the frame and the rack before plugging any of the
power cords into a power outlet (see
page 6 ).