Grass Valley K2 Storage System Instruction Manual v.3.2 Aug.01 2007 - Manual (Page 382)

382 K2 Storage System Instruction Manual July 3, 2007
Chapter 11 Administering and maintaining the K2 Storage System
6. Restart the K2 Media Server.
Loading RAID controller microcode
You might be instructed in K2 release notes to upgrade the RAID Controller
microcode on the RAID chassis. This allows you to take advantage of the RAID
enhancements and benefit from improved reliability.
To upgrade RAID Controller microcode, do the following:
1. In Storage Utility, right-click a controller in the tree view, then select Advanced |
Load Controller Microcode . Redundant controllers that share the same set of disks
are automatically selected and upgraded as a pair.
The Open File dialog box appears.
2. In the Open File dialog box, browse to the latest controller microcode file for your
controller, select the file, and click OK .
3. The Progress Report window appears showing the microcode upgrade task and the
percentage completion.
4. On 100% completion, power cycle the RAID controller chassis, then restart the K2
Media Server.
Downloading disk drive firmware
You might be instructed in K2 release notes to upgrade disk drive firmware. This
allows you to take advantage of the disk drive enhancements and benefit from
improved performance and reliability.