Grass Valley K2 Storage System Instruction Manual v.3.2 Aug.01 2007 - Manual (Page 352)

352 K2 Storage System Instruction Manual July 3, 2007
Chapter 11 Administering and maintaining the K2 Storage System
• All iSCSI clients and K2 Media Clients in the K2 Storage System must be offline.
To clean unreferenced files, do the following:
1. In Storage Utility, click Tools | Clean Unreferenced Files .
2. A message box appears “…searching…Please wait”. Observe progress.
3. A message box reports results. Respond as follows:
• If no unreferenced files are found, click OK to dismiss the results.
• If unreferenced files are discovered, you are prompted to delete them. Click Yes
to delete the files or No to leave the files intact.
To clean unreferenced movies, do the following:
1. In Storage Utility, click Tools | Clean Unreferenced Movies .
2. A message box appears “…searching…Please wait”. Observe progress.
3. A message box reports results. Respond as follows:
• If no unreferenced movies are found, click OK to dismiss the results.
• If unreferenced movies are discovered, you are prompted to delete them. Click
Yes to delete the movies or No to leave the movies intact.
Making a new media file system
The requirements for this procedure are as follows:
• You must access Storage Utility (via the K2 System Configuration application
login) with permissions equivalent to K2 administrator or higher.
• When you access Storage Utility, the K2 Storage System must be offline.
• All iSCSI clients and K2 Media Clients in the K2 Storage System must be shut
down.
NOTE: You lose all media with this procedure.
To make a new media file system, do the following:
1. In Storage Utility, click Tools | Make New File System .
The Settings dialog box opens.