Grass Valley K2 Storage System Instruction Manual v.3.2 Aug.01 2007 - Manual (Page 223)

July 3, 2007 K2 Storage System Instruction Manual 223
Configuring the redundant server 2B
1. In the K2 System Configuration application tree view, select the K2 Media Server
you are configuring as server 2B.
2. Click the Configure button. The Configure K2 Server wizard opens. Follow the
on-screen text to configure the server for a Level 3R K2 Storage System, as
described in the following table. Some screens require no input from you, as they
are based on the configurations already completed on a previously configured
server.
On this page… Do this…
Define server roles
Enter the name for the K2 Media Server. This should be the current
network name of the machine.
For Level 3 redundant, select iSCSI bridge, FTP server, and NAS server.
Click
Next
Software Configuration
This page checks for the
software required to support
the roles you selected on the
previous page.
Software required on a Level
3R K2 Media Server 2B is as
follows:
• K2 Server
• File System Client
• QuickTime
If software with Yes in the Required column reports as Not Installed, you
must first install it on the K2 Media Server before continuing. Refer to
Chapter 9, Managing K2 software. After installing the software, click
Check Software . When all required software reports as Installed, click
Next .