Grass Valley K2 Storage System Instruction Manual v.3.2 Aug.01 2007 - Manual (Page 219)

July 3, 2007 K2 Storage System Instruction Manual 219
Configuring server 2A
3. If you got a “The V: will not be available until this device is rebooted…” message
on the File System Server Configuration page, after the K2 Media Server restarts,
do the following:
a. In the K2 System Configuration application tree view, under the K2 Media
Server select the File System Server node.
The File System Server Configuration page appears.
b. Click Check and verify that the V: drive is shared. This is required for NAS
server functionality.
Configuring server 2A
For Level 3 redundant, after you have configured the first K2 Media Server (server
1A) and its redundant partner server (server 1B) you next configure the other “A” K2
Media Server (server 2A).
1. In the K2 System Configuration application tree view, select the K2 Media Server
you are configuring as server 2A.
2. Click the Configure button. The Configure K2 Server wizard opens. Follow the
on-screen text to configure the server for a Level 3R K2 Storage System, as
described in the following table. Some screens require no input from you, as they
Database Server
Configuration
You do not need to enter or configure anything on this page.
Click
Next .
Completing the
Configuration Wizard Click Finish . The wizard closes. The K2 Media Server restarts. Do not
proceed until restart processes are finished. If you are not sure if startup
is complete, wait 10 minutes.
On this page… Do this…