Grass Valley K2 Storage System Instruction Manual v.3.2 Aug.01 2007 - Manual (Page 183)

July 3, 2007 K2 Storage System Instruction Manual 183
Setting up the Level 3R redundant GigE switches
b. Click Modify Selected Ports .
c. For the trunked ports, set Port Enabled to Yes . On some switch models, the 10
Gig ISL ports are disabled by default, so make sure you enable them. Leave
Mode as default of
Auto .
d. Set Flow Control as follows:
- For the 3400cl series switch, set to Disable .
- For the 2900 series switch, set to Enable .
If you have both 3400cl series and 2900 series on your network, having different
Flow Control settings (disable for 3400cl, enable for 2900) does not cause
problems.
e. Click Apply Settings .
8. On the Port Configuration page, do one of the following:
• If you do not have trunks, select all ports.
• If you have trunks, select the remaining ports (the ports not trunked).
This setting
varies depending
on switch model.
Set as instructed
in text.