K2 raid for redundant k2 san, Chapter 2 cable k2 devices – Grass Valley K2 Storage User Manual
Page 56

56
K2 Storage Cabling Guide
01 April 2010
Chapter 2 Cable K2 devices
K2 RAID for redundant K2 SAN
These cabling instructions apply to the following:
• Level 3 (NEC 1400) K2 RAID on a Level 3 redundant K2 SAN.
To K2 Media
Server 2B
DL1
Primary
Expansion 1
Expansion 2
Set address to 0
Set address to 0
Set address to 1
Set address to 1
DL1
To K2 Media
Server 1B
To K2 Media
Server 2A
To K2 Media
Server 1A
To control port
on GigE switch A
To control port
on GigE switch B
NOTE: Use this cable/address
pattern for one or two expan-
sion chassis only. For more
expansion chassis you must
use a different pattern, as
specified in the K2 Storage
System Instruction Manual.
This manual is related to the following products: