Grass Valley K2 Storage - Manual (Page 42)

42
K2 Storage Cabling Guide 01 April 2010
Chapter 2 Cable K2 devices
Dell R610 GS for Level 10 basic K2 SAN
These cabling instructions apply to the following:
• Dell R610 PowerEdge Server on a Level 10 basic (non-redundant) K2 SAN.
Dell R610 GS for Level 10 redundant K2 SAN
These cabling instructions apply to the following:
• Dell 1950 PowerEdge Server on a Level 10 redundant K2 SAN.
Dell R610 GS for Level 20 basic K2 SAN
These cabling instructions apply to the following:
• Dell R610 PowerEdge Server on a Level 20 basic (non-redundant) K2 SAN.
To media (iSCSI)
port on GigE switch Fibre Channel
to RAID controller
To control port
on GigE switch FTP: To control port
on GigE switch
A
B
To media (iSCSI)
port on GigE switch A Fibre Channel
to RAID controller 0
To media (iSCSI)
port on GigE switch B Fibre Channel
to RAID controller 1
To control port
on GigE switch A FTP: To control port
on GigE switch A
To control port
on GigE switch B FTP: To control port
on GigE switch B
Heartbeat
cable
(serial)
To media (iSCSI)
ports on GigE switch Fibre Channel
to RAID controller
To control port
on GigE switch FTP: To control port
on GigE switch