Grass Valley K2 Storage - Manual (Page 41)

01 April 2010 K2 Storage Cabling Guide
41
Dell 2950 LS for basic K2 SAN
Dell 2950 LS for basic K2 SAN
These cabling instructions apply to the following:
• Dell 2950 PowerEdge Server with four iSCSI interface adapters (TOEs) on a basic
(non-redundant) online K2 SAN.
Dell 2950 LS for redundant K2 SAN
These cabling instructions apply to the following:
• Dell 2950 PowerEdge Server with four iSCSI interface adapters (TOEs) on a
redundant online K2 SAN.
PCI 1
PCI 2
PCI 3
Gb 1 Gb 2
To media (iSCSI)
ports on GigE switch Fibre Channel
to RAID controller
To control port
on GigE switch FTP: To control port
on GigE switch
PCI 1
PCI 2
PCI 3
Gb 1 Gb 2
PCI 1
PCI 2
PCI 3
Gb 1 Gb 2
A
B
To media (iSCSI)
ports on GigE switch A Fibre Channel
to RAID controller 0
To media (iSCSI)
ports on GigE switch B Fibre Channel
to RAID controller 1
To control port
on GigE switch A FTP: To control port
on GigE switch A
To control port
on GigE switch B FTP: To control port
on GigE switch B
Heartbeat
cable
(serial)