Dell 2950 for level 3 redundant k2 san, 1a 2a 1b 2b, Chapter 2 cable k2 devices – Grass Valley K2 Storage User Manual
Page 40

40
K2 Storage Cabling Guide
01 April 2010
Chapter 2 Cable K2 devices
Dell 2950 for Level 3 redundant K2 SAN
These cabling instructions apply to the following:
• Dell 2950 PowerEdge Server with two iSCSI interface adapters (TOEs) on a Level
3 redundant K2 SAN.
PCI 1
PCI 2
PCI 3
Gb 1
Gb 2
Fibre Channel
to RAID controller
PCI 1
PCI 2
PCI 3
Gb 1
Gb 2
Fibre Channel
to RAID controller
PCI 1
PCI 2
PCI 3
Gb 1
Gb 2
To control port
on GigE switch A
FTP: To control port
on GigE switch A
To control port
on GigE switch B
FTP: To control port
on GigE switch B
Fibre Channel
to RAID controller
PCI 1
PCI 2
PCI 3
Gb 1
Gb 2
1A
2A
1B
2B
Heartbeat
cable
(serial)
To media (iSCSI)
ports on GigE switch A
To media (iSCSI)
ports on GigE switch A
To media (iSCSI)
ports on GigE switch B
To media (iSCSI)
ports on GigE switch B
To control port
on GigE switch A
Media File System Server
Media Database Server
iSCSI Bridge
Roles:
Media File System Server
Media Database Server
iSCSI Bridge
Roles:
FTP Server
iSCSI Bridge
NAS Server
Roles:
FTP Server
iSCSI Bridge
NAS Server
Roles:
To control port
on GigE switch B
Fibre Channel
to RAID controller