Grass Valley iTX Output Server 2 v.2.5 - Manual (Page 26)

22
Setting Up Output Server 2
About the SCTE104 plugin
About the SCTE104 plugin
The SCTE104 plugin supports the following enhanced features:
• The ability to react to inbound Multiple Operation Messages containing more than one
command, including:
• Splice request commands.
• Local and National Avail Insert Commands, either individually or both in the same
Multiple Operation Message.
• Legacy DTMF triggers.
• Enhanced message pass-through, which provides the following additional
functionality:
• All inbound SCTE104 messages can be either passed through or blocked.
• When pass-through is enabled, iTX allows for the passing of “NULL” SCTE messages
for heartbeating to downstream services.
• The ability to enable or disable pass-through for all commands within a Multiple
Operation Message.
Splice commands received outside of a configured available window are unchanged.
• Insertion of outbound Multiple Operation Messages containing the following
additional commands:
• Local and National Avail Insert Commands, either individually or both in the same
Multiple Operation Message.
• Legacy DTMF triggers.
Configuring SCTE104 Features
To configure SCTE104 features for Output Server 2:
1 Open the Configuration panel and click the SCTE104 tab, as described in Accessing the
Output Server 2 User Interface , on page 16.
2 Check Enable SCTE 104.
As well as enabling SCTE104 signals, checking this options makes the additional
SCTE104 features appear.