EverFocus ENVS1600 - Manual (Page 60)

ENVS800 / ENVS1600 / ENVS3200 Installation Manual
60 of 115
5.6.4 Conigure - Encoding Option Panel
Always Record
Select this option to record the video at all time.
Record on Event Select this option to obtain the Select Event panel. From the
Smart Guard list, check the box of the camera(s) that you want to
trigger the recording action. Click OK to complete the setting.
Note: This option needs start Smart Guard to trigger the recording
schedule.
Record on Motion Select this option to start recording when there are motions
detected.
To detect Motion, you have to define a detection zone. Left-click
and drag the mouse to draw a detection zone. You may define
more than one zone on the screen by repeating the same
process.
User can also click on “All” button to select the entire detection
zone. You may adjust the sensitivity and the frame interval.
Pre-record/ Post-
record Time The pre-record/ post-record function saves the recording data
accordingly. For instance, to set up a 5 second pre-record time
means the system will start saving the recording data 5 seconds
before the event happens.
Always Record
Record on Event
Record on Motion
Pre-record/ Post-record
Select Event Panel