EverFocus ENVS1600 - Manual (Page 20)

ENVS800 / ENVS1600 / ENVS3200 Installation Manual
20 of 115
On lower right side of camera setup screen are additional settings for On Screen Display
information which will overlay the camera display:
When settings are complete, click APPLY ALL to confirm for the selected (checked) cameras,
then confirm with OK in the CAMERA setup menu.
Minimum settings in GENERAL menu.
Open camera setup menu >CONFIG > SETTING > tab GENERAL:
1. Please verify that all recording HDD are entered correctly under STORAGE/LOCATION.
These drives are the entered at factory by default, depending on the model.
2. Check and adjust the other important recording settings:
Automatic Recycle: check the box and the NVR will delete the oldest records, if the
recording HDDs are filled.
OSD on/off
OSD of date / date adjustment
OSD of time / time adjustment
OSD camera number
OSD camera name
OSD bitrate of single camera
OSD font settings
Apply selection to all listed cameras