EverFocus ENVS1600 User Manual

Page 54

Text mode
Original mode

ENVS800 / ENVS1600 / ENVS3200 Installation Manual

54 of 115

5.5.2.5 Event action: Signal digital output

This event action allows to switch a contact output of an installed IP-device.
After selecting SIGNAL DIGITAL OUTPUT as event action and double click opens a
window with all available digital output contacts in the system:

Activated the checkbox at desired contact output and confirm with OK.

5.5.2.6 Event action: Send a SMS message

After selecting SEND A SMS MESSAGE as event action and double click opens a
window with a list of available contact persons (setup in > CONFIG > SETTING >
ADDRESS BOOK required):

Select a contact for SMS notification and confirm with OK.