Grass Valley RTic v.2.43 - Manual (Page 53)

RTic User Manual- document version: 2.43 - 53
o text shows the value grabbed (parameter field)
o num is the times this value was found.
o perc shows occurrence as a percentage
o perc3 is the same value, but is always 3 digits long
o total indicates the number of files used (i.e. files that matched the parameter name and
where the value was less than 3 chars)
• single processing (on/off): if checked, single file processing is enabled. Files are processed one
by one; processing stops after one file has been processed (starting with the oldest file found). If
not checked, all files in the XML input directory are processed in one Event.
• Select Records: click this button to select and browse an XML-file, then select a node, record
and parameter
• selected node: select the node you want to grab
• selected record: select the record you want to grab
• parameter name: select the parameter you want to grab
• Reset Vote: ---
Vote results
To write vote results to a target, link a Record select object to the XML vote object, select a parameter and
specify the target.
Test Grab
Use the Test grab option to test incoming data.
20.33 onTickfill Object [Legacy]
Type
Events; onTickfill Object
Explanation
Use this object to check the number of stories in the ticker buffer. If the number of stories in the buffer is
less than a predefined threshold, new stories are grabbed from a source.
This object can only be used when in the TemplatoR Ticker Initialise (Angle) Object the ticker-mode is
specified as "story once".
Properties
•
ticker status file: specify file in format: \\ip\delta\tickfillx.y. This status file is automatically generated.
o ip: ip
o x: layer
o y: ticker ID
• ticker story threshold: specify number of stories that should be available in ticker buffer
• Toggle on/off: toggle Event on/of
Toggle
This Event can be toggled on/off via a socket.