Grass Valley RTic v.2.43 - Manual (Page 27)

RTic User Manual- document version: 2.43 - 27
11 The Channel Composer Template Object how to
Use this object to start a Channel Composer template, and update the scene parameters in this template.
 Insert a Targets > Channel Composer Template object.
 If not already inserted, insert a System > K2 Edge System object.
 Configure and connect the system and Channel on which templates are stored.
 Link the appropriate System object to the Template object.
 Click the load template icon to list the templates available on the connected playout system and
Channel. RTic will list all the available Templates from the active Channel Pack.
 In the templates box, select a template.
 Select a start mode for the template:
o start template at every grab
o do not start template automatically
o start template when grab results in changed data
o remote controlled
 Click Save to save changes, click Cancel to discard.
To link sources to the scene parameters in a template:

Link the appropriate Source (or if applicable Process) object(s) to the Template object.
A dropdown menu that lists the template’s available scene parameters opens.
 Select the scene parameter you want to update.
 Leave the layer value at the default. This value is included for backwards compatibility.
 Click Save to save settings, Cancel to discard.
Example link to Source.