Grass Valley RTic v.2.43 - Manual (Page 10)

RTic User Manual- document version: 2.43 - 10
5 RTic modes
5.1 Designer
Designer mode: switch to this mode when building projects.
In this mode, you can manually test grab data. To test grab, verify if the system object is connected. In
Designer mode, you need to connect manually to the playout server. Note that data is actually sent to
system.
5.2 Grabber Active
Playout mode: activates the RTic project.
In this mode, Events – and thus (automatic) data grabbing - are activated. In Grabber Active mode, RTic
automatically connects to the playout server(s) as specified in the System object(s). Projects cannot be
altered.
5.3 Off
Deactivates the RTic project. Events – and thus (automatic) data grabbing - are deactivated. In this mode,
you can manually test grab data. To test grab, verify if the system object is connected. Note that data is
actually sent to system. Projects cannot be altered.
5.4 Show content
Select this option to display the results of the last grab underneath objects.