beautypg.com

Electromagnetic compatibility, Laser safety – Grass Valley FIO-1901-TT User Manual

Page 2

background image

GUIDE TO INSTALLATION AND OPERATION

FIO-1901-TT

Electromagnetic Compatibility

This equipment has been tested for verification of compliance with FCC Part 15, Subpart B requirements for

Class A digital devices.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

This equipment has been tested and found to comply with the requirements of the EMC directive

2004/108/CE:

• EN 55022 Class A radiated and conducted emissions
• EN 55024 Immunity of Information Technology Equipment
• EN 61000-3-2 Harmonic current injection
• EN 61000-3-3 Limitation of voltage changes, voltage fluctuations and flicker
• EN 61000-4-2 Electrostatic discharge immunity
• EN 61000-4-3 Radiated electromagnetic field immunity – radio frequencies
• EN 61000-4-5 Surge immunity
• EN 61000-4-11 Voltage dips, short interruptions and voltage variations immunity

Laser Safety


The single mode transceiver in the SFP module is a Class 1 laser product. It complies with IEC-60825 and FDA 21
CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The
optical ports of the module shall be terminated with an optical connector or with a dust plug.




How to contact us:

For technical assistance, please contact the Miranda Technical support centre nearest you:


Americas
Telephone:
+1-800-224-7882
e-mail:
[email protected]


Asia
Telephone:
+852-2539-6987
e-mail:
[email protected]

Europe, Middle East, Africa, UK

Telephone:
+44 (0) 1491 820222

e-mail:

[email protected]

China

Telephone:
+86-10-5873-1814
e-mail:
[email protected]

France (only)
Telephone:

+33 (0) 1 55 86 87 88

e-mail:

[email protected]

Visit our web site at

www.miranda.com

This manual is related to the following products: