Grass Valley DEC-1023 User Manual
Page 26
GUIDE TO INSTALLATION AND OPERATION
22 | DEC-1023
CC (525) / WSS (625): if CC or WSS data are
present in the signal, you may check this box to
allow this data to pass-through unaffected.
3.5.8 Timing
These controls provide access to timing adjustments
which affect the signal outputs. There are two slider
controls, each with a data reporting box which
shows the current value, and into which values can
be typed directly. If the Frame Sync option is not
enabled, only the Horizontal delay may be
accessed.
VERTICAL (Lines): 0, 1 …, 523, 524 (for 525
operation), 623, 624 (for 625 operation): sets the
number of lines for vertical delay. This control is
available when the Frame Sync option has been
activated (see Options tab).
HORIZONTAL (µs): 0, 0.037,0.064 …, 63.5 (for 525
operation) …,64 (for 625 operation): sets the
horizontal delay in µs.
FRAME DELAY Pulldown box: sets delay by frame
steps: 0, 1 or 2 frames. This control is available
when the Frame Sync option has been activated
(see Options tab p.24).
Figure 3.15 Blanking group
Figure 3.16 Timing group