Grass Valley DEC-1023 - Manual (Page 11)

GUIDE TO INSTALLATION AND OPERATION
DEC-1023 | 7
• The STATUS LED on the selected card flashes yellow.
The local control panel displays a menu that can be navigated using the four pushbuttons located beneath
the display. The functionality of the pushbuttons is as follows:
[+] [–]
Used for menu navigation and value modification
[SELECT] Gives access to the next menu level. When a parameter value is shown, pushing this button
once enables modification of the value using the [+] and [–] buttons; a second push confirms the
new value
[ESC]
Cancels the effect of parameter value changes that have not been confirmed; pushing [ESC]
causes the parameter to revert to its former value.
Pushing [ESC] moves the user back up to the previous menu level. At the main menu, [ESC]
does not exit the menu system. To exit, re-push the [SELECT] button for the card being
controlled.
If no controls are operated for 30 seconds, the controller reverts to its normal standby status, and the
selected card’s STATUS LED reverts to its normal operating mode.
3.3.2 Menu for local control
The DEC-1023 has operating parameters which may be adjusted locally at the controller card interface.
• Press the SELECT button on the DEC-1023 front card edge to assign the Densité frame’s local
control panel to the DEC-1023
• Use the keys on the local control panel to step through the displayed menu to configure and adjust
the DEC-1023.
The complete menu structure is shown in the Annex to this document, beginning on page 35.
3.4 Remote Control Using the RCP-100
The DEC-1023 can be controlled through a menu accessible using Miranda’s RCP-100 remote control panel.
Please refer to the RCP-100 Guide to Installation and Operation for detailed instructions on installing and
operating the RCP-100, and for instructions on how to connect the RCP-100 to the DEC-1023 (or any other
supported card) so that the menu can be accessed.
3.5 Remote control using iControl
The operation of the DEC-1023 may be controlled using Miranda’s iControl system.
• This manual describes the control panels associated with the DEC-1023 and their use.
• Please consult the iControl User’s Guide for information about setting up and operating iControl.
In iControl Navigator or iControl Websites, double-click on the DEC-1023 icon to open the control panel.