Grass Valley DEC-1023 - Manual (Page 15)

GUIDE TO INSTALLATION AND OPERATION
DEC-1023 | 11
The Main Window shows all controls, adjustments and information pertaining to the area of interest which
appears as a title to the panel, corresponding to the selection button to the left of the control panel.
In many cases, controls are provided to configure the DEC-1023’s features. Types of controls that may be
found are:
Slider:
The current value is displayed beneath the center of the slider bar (e.g. 39 in the example shown). To
change the value, move the slider by clicking and dragging it, or by clicking the arrow icon at either end.
Slider with data box:
The current value is displayed in the data box at the right hand side (e.g. 50 in the example shown). To
change the value, move the slider by clicking and dragging it, or by clicking the arrow or double-arrow icon at
either end, or type a new value directly into the data box, and hit “enter” from your keyboard. If you enter a
value outside the permitted range (as shown beneath the slider), the data box will flash red and the value will
not be changed.
Pull-down list:
The current selection is shown on the icon. To change it, click on the down arrow at the right of the box, and
click on the desired option in the list that appears below the box.
Check box (with label):
A selected box has a checkmark in it, as shown in the example, while an unselected box is blank. Click on
the box to change its status.
Each of the panels associated with the groups accessed from the buttons in Section 2, and shown in Section
4, is described individually in the following sections.
3.5.2 Input