Grass Valley DEC-1023 - Manual (Page 18)

GUIDE TO INSTALLATION AND OPERATION
14 | DEC-1023
CH 1, 2, 3, 4 and CH 5, 6, 7, 8: use the pulldown list to
choose the AES audio groups in which audio channels 1
to 4 and 5 to 8 will be embedded.
Output – Audio Insert: use the pulldown to select whether
the inserted audio will be 20 bit or 24 bit
3.5.5 Thumbnail
Thumbnails are used to monitor the video output
signal of the DEC-1023. Streaming parameters
are set using these controls.
Status Display (optional with activation of the
probing option)
On the left side of the panel is a display of the
current status of the parameters measured by the
probe. Two separate status columns are shown:
Current status shows the status
now. Latched status shows the
status as affected by latching.
When an error is detected, it is
flagged in both columns by turning
red. When the error disappears, the
current status returns to green.
However, the Latched status shows
the error until it is manually cleared
using the Reset Latched button
beneath the status monitors. You
can also reset the Current status,
to confirm the presence of
displayed errors. Only those
parameters that have been enabled are reported in the current status list; the others show a
gray status box and their names are grayed in the list.
Figure 3.6 Audio Output group – Embedding tab
Figure 3.7 Thumbnail group – Connection tab