Grass Valley DEC-1023 - Manual (Page 13)

GUIDE TO INSTALLATION AND OPERATION
DEC-1023 | 9
Table –iControl Status Icon interpretation
Icon #1 – Manual Card Configuration
(green)
Remote card control activated. The iControl interface can be used to operate the card
(yellow)
Local card control active, The card is being controlled using the Densité frame control
panel, as described in section 3.3. Any changes made using the iControl interface will have
no effect on the card.
Icon #2 – Input status
(green)
Signal detected and valid.
• Beneath the icon, the format will be indicated, and the specific format details will
be listed if the cursor is moved over the icon.
(red)
Signal absent
No rear
Reference mismatch
Icon #3 – Reference
(green)
Reference signal detected and valid
(yellow)
Input signal used as reference
(red)
Reference absent
Icon #4 – Video alarms status
(green)
Video OK
(yellow)
(red)
Error
(gray)
All video disabled