Grass Valley 3e Student CameraMan - Manual (Page 29)

Use Your Student System
CameraMan 1-CCD and 3-CCD Student Camera System Installation and Operations Manual 23
To Set the Wide-Angle
Group View
FIGURE 3.2 Wide-Angle Group View
1. Follow previously listed steps 1-4 to achieve a
wide-angle view.
2. Input Location Preset Number 72 to be the
default preset.
3. Then press and hold the ENTER button until you
hear two beeps. The two beeps indicate the
GROUP View has been stored.
To Recall a Student
Location
FIGURE 3.3 Student Zoom View
When a student wishes to speak, the student simply
presses the “My Turn” button on the microphone
and the CameraMan Camera will pan, tilt and zoom
in on that student, magnifying his or her image.
When the student is done speaking and the “My
Turn” button is released, the CameraMan Camera
will return to a wide-angle shot of the classroom
(preset 72).