Grass Valley 3e Student CameraMan - Manual (Page 22)

Chapter 3
16 CameraMan 1-CCD and 3-CCD Student Camera System Installation and Operations
INPUT #32 OPERATION (DIP Switch 4):
This switch is used to determine the operation mode
of input 32.
• NORMAL - The input will operate as a
normal input, identical to inputs 1-31.
• AUDIO - The input will operate in an audio-
only mode, which causes no camera
movement when the microphone is active.
In audio-only mode, an active input will not
cause the VIDEO RELAY to be activated.
The audio-only mode is intended for use by some-
one who wishes to be heard, but does not want to
cause the camera to position on them, such as a
room facilitator.
INPUT #33 (DIP Switches 5,6)
Switch 5 is used to determine the operation mode of
input 33.
• NORMAL - The input will operate as a
normal input, identical to inputs 1-31.
• OPTION - Then the operation is dependent
upon the setting of DIP Switch 6.
Switch 6 settings
• UP - The input will operate in an audio-only
mode, which causes no camera movement
when the microphone is active. When in
audio-only mode, and active input will not
cause VIDEO RELAY to be activated.
• DOWN - The input will operate as a Master
Override input. When this input is active,
the camera will be positioned to a Master
Override position (preset 33) and all other
microphones will be “LOCKED” out from
controlling the camera. Once this input is
released, control is returned to all
microphones and they are serviced as
usual. In this case, the video relay will
remain open.