Grass Valley 3e CameraMan - Manual (Page 21)

071839000
June 2005 13
Mounting the CameraMan 3e 3-CCD Camera
Mount the Camera on any flat, non-slick, non-metal
surface with a minimum supporting area of 8” x 8” by
following these easy steps.
Step 1
Check the selected camera-location to ensure that
there is enough camera and cable clearance space
for the CameraMan to pan and tilt without obstruc-
tion (see Figure 2.1).
FIGURE 2.1 Camera Clearance Diagram
Note: Do not mount the camera upside down, or
with more than a 10
o angle from horizontal.
Chapter 2
Connecting the CameraMan
3e 3-CCD Camera